Superglide Type-C for Jinggg-X: Skate Fit and Swap Guide
By Official Pulsar Gaming Gears - The Best Gaming Gears In the ... | Published: 2026-10-31
Category: How-to Guides
Swap your Jinggg-X mouse feet for Superglide Type-C glass skates with a safe, step-by-step process. Learn fit checks, removal tips, and common mistakes to avoid.
Quick answer
Swap your Jinggg-X mouse feet for Superglide Type-C glass skates by first confirming the skates are the Jinggg-X-specific version, then carefully removing the old feet, cleaning the base, and applying the new skates with even pressure. Work slowly and check alignment before pressing down.
Why Type-C glass skates change the feel of your Jinggg-X
Superglide Type-C uses a control-oriented glass formulation that balances glide and stopping power. On a Jinggg-X, this can make tracking smoother while keeping micro-adjustments predictable. If you prefer a faster, slicker feel, Type-S is the alternative, but Type-C is the safer pick for precise aim.
When not to swap: surface and preference checks
Glass skates can feel different on soft or textured mousepads, and some players prefer the consistency of stock PTFE feet. If you often change mousepads or play on unusual surfaces, test the skates on your main pad before committing. Also, if your Jinggg-X is still under warranty and you want to keep it intact, consider whether removal is worth the risk.
Step-by-step swap process
- Verify compatibility: Check that your Superglide Type-C package is labeled for Jinggg-X. The skates are shaped for that mouse, so other models won't fit correctly. A quick label check prevents a frustrating return.
- Prepare your workspace: Work on a clean, well-lit surface with a soft cloth underneath. Have isopropyl alcohol, cotton swabs, and a plastic tool (like a guitar pick) ready. Avoid metal tools that can scratch the mouse base. A tidy space reduces the chance of losing small parts.
- Remove the old feet: Heat the old feet gently with a hairdryer for a few seconds to soften the adhesive, then peel them off slowly from one corner. Use the plastic tool to lift edges if needed. Don't rush—ripping can leave residue or damage the base. Warm adhesive peels cleaner and safer.
- Clean the base: Dampen a cotton swab with isopropyl alcohol and wipe away all old adhesive residue. Let it dry completely before proceeding. Any leftover glue will prevent the new skates from sitting flush. A dry, residue-free surface is essential for a strong bond.
- Test-fit before peeling: Peel only one corner of the adhesive backing and place the skate in its recess without pressing down. Check that it sits flat and aligns with the edges. If it's off, lift and reposition before full adhesion. Dry-fitting first avoids crooked skates.
- Apply and press firmly: Once aligned, peel the rest of the backing and press the skate down evenly for 10–15 seconds. Repeat for all feet. Avoid pressing too hard on the glass edges. Even pressure ensures full contact without cracking.
- Let it set and test: Wait at least 30 minutes before using the mouse to let the adhesive bond. Then test on your mousepad for glide and control, adjusting your grip if needed. A short wait improves longevity.
Product facts
- Superglide (Type-C) for Jinggg-X: Superglide (Type-C) for Jinggg-X is a glass skate with a control formulation and adhesive backing, designed specifically for the Jinggg-X mouse. The tailored fit and control glide mean you get a balanced feel without trimming, but you must align it correctly during installation.
Superglide (Type-C) for Jinggg-X
