Superglide 2 for G900/G903 Installation Guide

Quick Answer

Installing Superglide 2 on your Logitech G900 or G903 is straightforward if you clean the surface, align the feet correctly, and press firmly. Avoid common mistakes like misalignment or air bubbles.

Installation Steps

1. Clean the surface: Remove the old mouse feet and thoroughly clean the bottom of your G900/G903 with isopropyl alcohol. Let it dry completely. Common mistake: leaving residue or dust, which prevents the adhesive from bonding properly. Check for any leftover adhesive or debris under bright light.
2. Peel and align: Peel the backing from the Superglide 2 sheet. Align it with the mouse base, starting from the front edge. Common mistake: misaligning the sheet, which causes wrinkles or overhang. Use the edge of the mouse as a guide and press down from the center outward.
3. Press and smooth: Press firmly across the entire surface, using a credit card or squeegee to remove air bubbles. Common mistake: pressing too lightly, leading to bubbles or peeling over time. Work slowly from one side to the other to push air out.
4. Trim excess (if needed): If the sheet extends beyond the mouse base, trim carefully with a sharp craft knife along the edge. Common mistake: cutting too deep and scratching the mouse surface. Hold the knife at a shallow angle and cut in short strokes.

Product Facts

• Superglide 2 for Logitech G900 / G903: Superglide 2 features a revolutionary micro-surfaced texture that covers the entire surface, including the round edges, offering fast speed and smooth glide with exceptional stopping power. This means you get consistent control during fast flicks and precise stops, ideal for competitive gaming.