How to Install Superglide Feet on Your Gaming Mouse

Quick answer

To install Superglide feet on your gaming mouse, clean the base thoroughly, align the new feet with the screw holes, and press firmly. Avoid touching the adhesive or rushing the alignment.

Installation steps

1. 1. Remove old feet: Heat the stock feet gently with a hairdryer for 10–15 seconds to soften the adhesive, then peel them off with a plastic spudger or tweezers. Avoid metal tools that can scratch the mouse base. Common mistake: pulling cold feet can leave adhesive residue. Heat makes removal clean.
2. 2. Clean the base: Wipe the exposed plastic base with isopropyl alcohol and a lint-free cloth. Remove all adhesive residue and dust. Let it dry completely for 2 minutes. Checkpoint: any leftover adhesive will prevent the new feet from sitting flat.
3. 3. Align the new Superglide feet: Peel the backing from one Superglide foot. Hold it by the edges (avoid touching the adhesive) and align it with the screw holes and contours of the mouse base. Lower it gently without pressing down. Common mistake: pressing before alignment makes repositioning impossible. Take your time.
4. 4. Press and set: Once aligned, press firmly on the center of the foot for 10 seconds, then press around the edges. Repeat for all feet. Let the adhesive cure for 1 hour before using the mouse. Checkpoint: using the mouse immediately can shift the feet. Wait for a full cure.

Product facts

• [ADDON]Superglide2 (Type C) Feet - Black: Superglide2 (Type C) Feet are designed for Type C compatible Pulsar mice and offer a smooth, consistent glide. If your mouse uses the Type C footprint, these feet provide a direct replacement without modification.

  

• [ADDON]Superglide1 (Type S) Feet - White: Superglide1 (Type S) Feet are sized for Type S compatible mice and come in a white finish. The Type S shape ensures a precise fit for smaller or differently shaped Pulsar mice, preventing misalignment during installation.