Superglide Type-C vs PTFE on G PRO X SUPERLIGHT 1
By Official Pulsar Gaming Gears - The Best Gaming Gears In the ... | Published: 2026-11-03
Category: Comparações
Compare Superglide Type-C glass feet and PTFE skates for the Logitech G PRO X SUPERLIGHT 1. Learn the glide, stopping power, and fit trade-offs before you swap.
Quick answer
Choose Superglide (Type-C) for the G PRO X SUPERLIGHT 1 if you want a fast glass glide with more stopping power than earlier glass feet. Stay with PTFE skates if you prefer a familiar, softer feel or swap feet often.
What the Type-C surface changes on the SUPERLIGHT 1
Superglide Type-C uses a micro-surfaced texture across the entire foot, including the rounded edges. That matters on the SUPERLIGHT 1 because the mouse is light and easy to move; a surface with controllable speed helps you start and stop without feeling like you are skating on bare glass.
The trade-off is that glass feet feel different from PTFE from the first swipe. Give yourself a session or two to adjust before deciding the speed is wrong for you.
Where PTFE still makes sense on this mouse
PTFE skates are the stock-style option many players already know. They tend to feel softer and more forgiving on textured or worn pads, and they are inexpensive to replace if you like fresh feet regularly.
If you play on a hard or coated pad where glass feels too slippery, or you change mouse feet often, PTFE is the lower-commitment choice. The trade-off is that you give up the specific controllable-speed surface that Superglide Type-C is built around.
Fit and installation trade-off
Superglide Type-C is listed specifically for the G PRO X SUPERLIGHT 1, not the SUPERLIGHT 2. Check your model before ordering, because the two mice use different foot layouts.
Glass feet are a fit-and-leave option: once installed correctly, you generally do not swap them the way you would PTFE. That makes the initial alignment more important than the price difference.
Superglide Type-C vs PTFE: trade-offs to weigh
- Glide and stopping power: Superglide Type-C aims to keep a fast, smooth glide while adding stopping power through its micro-surfaced texture. PTFE gives a more traditional skate feel with less of a deliberate speed-and-stop character. If you want fast movement but need to brake precisely, Type-C is the more purpose-built option.
- Pad compatibility and feel: Glass feet feel most different on hard or coated pads, where the lower friction is more noticeable. PTFE is the safer choice if you regularly switch between pad types and want a consistent, familiar feel. Match the feet to the pad you actually use most, not the one you use occasionally.
- Maintenance and replacement: PTFE wears and is commonly replaced; glass feet are intended to be installed and left in place. Superglide Type-C costs more up front than a set of PTFE skates, so the decision is about long-term feel rather than frequent swapping. Commit to glass only if you are comfortable keeping the same feet for a long stretch.
Product facts
- Superglide (Type-C) for Logitech G PRO X SUPERLIGHT 1: Superglide (Type-C) for Logitech G PRO X SUPERLIGHT 1 uses a micro-surfaced texture covering the entire surface, including the round edges. The full-surface texture is what gives the feet their controllable speed rather than a pure glass glide.
Superglide (Type-C) for Logitech G PRO X SUPERLIGHT 1
Who should choose which
Best for
- Players who want a fast glass glide with more stopping power on the G PRO X SUPERLIGHT 1
- Players who prefer to install feet once and leave them
- Players on a pad where they want a deliberate speed-and-control balance
Not for
- Players who often swap feet or prefer the softer feel of PTFE
- Owners of the G PRO X SUPERLIGHT 2, which needs a different fit
- Players who want the lowest-cost replaceable skates
