Superglide Type-C for Susanto-X: Fit and Installation

Quick answer

The Superglide Type-C glass feet are designed specifically for the Susanto-X mouse. Follow these steps to install them correctly and avoid common mistakes that can affect performance.

Installation steps

1. 1. Remove old feet and clean the mouse base: Peel off the existing mouse feet carefully. Use a microfiber cloth with isopropyl alcohol to wipe the entire base surface, removing all adhesive residue and dust. Let it dry completely for 1–2 minutes. Common mistake: Leaving residue or moisture under the new feet causes poor adhesion and uneven glide.
2. 2. Align the Superglide Type-C feet: Hold each foot by its edges (avoid touching the adhesive side) and position it over the corresponding recess on the mouse base. The Type-C shape matches the Susanto-X exactly, so it should fit without trimming. Common mistake: Forcing a misaligned foot can damage the adhesive or scratch the glass surface.
3. 3. Press firmly from center outward: Once aligned, press down on the center of the foot and work your way to the edges using your thumb. Apply even pressure for about 10 seconds to ensure full contact. Common mistake: Pressing only the edges can trap air bubbles under the center.
4. 4. Wait before use: Allow the adhesive to cure for at least 2 hours before using the mouse. For best results, wait overnight. This ensures the bond is strong and the glide surface is stable. Common mistake: Using the mouse immediately can shift the feet and reduce performance.

Product facts

• Superglide (Type-C) for Susanto-X: New Controllable Speed Surface with micro-textured finish covering the entire surface, including round edges. This texture provides both fast glide and reliable stopping power, making it easier to stop precisely on target without overshooting.